Chamberlain 3800P User Manual download pdf (Page 28)

*3-Button Remote

If provided with your garage door opener, the large button is

factory programmed to operate it. Additional buttons on any

Security✚

3-Button remote or

mini-remote can be

programmed to

operate other

Security✚

garage

door openers.

To Erase All Codes From

Motor Unit Memory

To deactivate any unwanted remote, first

erase all codes:

Press and hold the “learn” button on

motor unit until the learn indicator light

goes out (approximately 6-9 seconds).

All previous codes are now erased.

Reprogram each remote or keyless

entry you wish to use.

Your garage door opener has already been programmed at the factory to operate with your hand-held remote control. The door

will open and close when you press the large push button.

Below are instructions for programming your opener to operate with additional Security✚

remote controls.

1. Press and release the purple “learn”

button on the motor unit. The learn

indicator light will glow steadily for 30

seconds.

2. Within 30 seconds, press and hold the

button on the hand-held remote* that

you wish to operate your garage door.

3. Release the button when the motor

unit lights blink. It has learned the

code. If light bulbs are not installed,

two clicks will be heard.

To Add or Reprogram a Hand-held Remote Control

USING THE “LEARN” BUTTON USING THE SMART CONTROL PANEL™

LOCK

LIG

PROGRAMMING

NOTICE: If this Security

✚

garage door opener is operated with a non-rolling code transmitter, the technical measure in the

receiver of the garage door opener, which provides security against code-theft devices, will be circumvented. The owner of the

circumvent that technical measure.

LOCK

LIGHT

IGH

LOC

LIG

1. Press the Prog <Learn> button on the

Smart Control Panel™.

2. Press the Prog <Learn> button again

to confirm Learn Mode.

3. Press the button on the hand-held

remote that you wish to operate your

garage door.

4. When the motor unit lights blink, it has

learned the code. If light bulbs are not

installed, two clicks will be heard.

LOCK

LIGHT

LOCK

LIGHT

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Chamberlain 3800P User Manual Page 28

Comments to this Manuals

Related products and manuals for Kitchen Chamberlain 3800P