Chamberlain MADCBB User Manual

MADCBB, MATDCBB, MASDCBB, & MASTDCBBHEAVY-DUTY DC BARRIER GATE OPERATOROWNER'S MANUALRADIORECEIVERINCLUDEDIMPORTANT: Read and understand Warr

10ACCESSORY AND RELAY CONNECTIONSThese terminals will provide battery backed power to 24 Vdc devices and are located at the bottom of the control boar

11WIRING » PRIMARY/SECOND WIRINGPRIMARY/SECOND WIRINGIn a primary/second configuration, either operator can be the primary. Choose an operator to be t

12NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except

13FEATURES AND FUNCTIONS » S1 DIP SWITCHESAUX LIMITS1J2JM/S1R1U4R12S1D812345678S212345678D1ØRA BC DEFAST RUN TIMER (FULL SPEED RUN TIMER)DIP Switch S1

14FEATURES AND FUNCTIONS » S2 DIP SWITCHESTIMER-TO-CLOSEDIP Switch S2-1 to S2-5The S2-1 to S2-5 DIP switches will set the period of time the gate rema

15ADJUSTMENTS » INSTANT REVERSE DEVICE (IRD) + INSTALL THE BARRIER ARMTo reduce the risk of SERIOUS INJURY or DEATH:• Disconnect power BEFORE perform

16OPERATION AND MAINTENANCE » GENERAL SERVICE + SHEAR PIN REPLACEMENT + BATTERYTo avoid SERIOUS PERSONAL INJURY or DEATH from electrocution, disconnec

17SUGGESTED LOOP SENSOR LOCATIONSDo not allow control devices to be within 10 feet of gate or operator.RECOMMENDATIONS:• If vehicle detectors are use

18INSTALL THE K1 AUXILIARY RELAY AND CONNECTOR AT MEGA ARM CONNECTED TO THE ACCESS DEVICE 1. Press the relay into the K1 location ensuring the pins a

19SAMS WITH OTHER OPERATORSREQUIRES THE K1 RELAY OPTION (Order SAMS KIT)This feature allows a logical interface between the MEGA ARM barrier gate and

2SAFETY 2-4Safety Symbol and Signal Word Review 2UL325 Model Classifications 3Safety Installation Information 4INTRODUCTION 5Features 5Tools Needed

20INPUT LOCATIONSAccessory power is 24 Vdc regulated rated at 500 ma. [1/2 amp].NOTE: J5 #8 is now the SAMS with memory input (see page 13).D11: Heart

21WARNING - DISCONNECT BATTERIES AND AC POWER BEFORE SERVICING ANY MECHANICAL OR MOVING COMPONENTS.BATTERY CHECKOUTWhen the batteries become weak the

22PART NUMBERS AND DESCRIPTIONS ITEM PART NUMBER DESCRIPTION 1 MA001 Controller 2 MA002 Removable Connector 3 MA003 DC Motor - 24 Vdc 4

23SECURITY✚® SINGLE BUTTON REMOTE CONTROL Includes visor clip. Model 371LMSECURITY✚® 4-BUTTON REMOTE CONTROL Includes visor clip. Model 374LMPASSPORTT

© 2011, The Chamberlain Group, Inc.01-60162G All Rights Reserved(YOU MUST READ, UNDERSTAND AND AGREE WITH ALL ITEMS IN THE LIMITED WARRANTY)LiftMast

3CLASS I – RESIDENTIAL VEHICULAR GATE OPERATORA vehicular gate operator (or system) intended for use in a home of one-to four single family dwellings,

4 1. Vehicular gate systems provide convenience and security. Gate systems are comprised of many component parts. The gate operator is only one com

5• Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc.• Reversible arm direction for right or left han

6INSTALL THE CONCRETE PAD AND CONDUITCheck the national and local building codes before installation.Layout the concrete pad for the operator. The con

7INSTALLATION » ATTACH THE OPERATOR TO THE CONCRETE PADATTACH THE OPERATOR TO THE CONCRETE PADPosition the operator on the concrete pad and mark the m

8Use UL approved 14AWG (or larger) 600 volt insulated wire only.NOTE: Do not connect the batteries until instructed. 120 VACEnsure your main power is

9WIRING » INPUTSThe J5 terminal strip is used for controlling the barrier arm with various accessories such as receivers, loop detectors, access contr