Chamberlain HD930EV User Manual download pdf (Page 28)

Installation

OPTION B PERMANENT WIRING (Models manufactured after October 2012)

If permanent wiring is required by your local code, refer to the following procedure. To make a

permanent connection through the 7/8 inch hole in the top of the motor unit (according to local

code):

1. Remove the motor unitcover screwsand set the cover aside.

2. Remove the attached 3-prong cord.

3. Connectthe black(line) wire to the screw on the brass terminal;the white (neutral) wire to the

screw on the silver terminal; and the ground wire to the green ground screw.The opener must

be grounded.

4. Reinstall the cover.

Ground Tab

Green

Ground

Screw

Ground

Wire

White Wire

Black

Wire

Black

Wire

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

Chamberlain HD930EV User Manual Page 28