Chamberlain 248730 User Manual download pdf (Page 37)

Operation

Programming

NOTICE: Ifthis Security+

garage door opener is operated with a non-rolling code transmitter, the

technical measure in the receiver of the garage door opener, which provides security against code-theft

devices,will be circumvented. The owner of the copyright in the garage door opener does not authorize

the purchaser or supplier of the non-rolling code transmitter to circumvent that technical measure.

PROGRAM A REMOTE CONTROL USING THE LEARN BUTTON

1. Locate the Learn Button.

2. Press and immediately release the Learn button. The Learn LEDwill glow steady for 30

seconds.Within 30 seconds...

3. Press and hold the button on the remote control that you wish to use.

Release the button when the garage door opener lightsblink or two clicksare heard.

When replacing the light lens cover,ensure the antenna wires are hanging straight down.

LEARN LED

LEARN

Button

“click”

PROGRAMAREMOTECONTROLUSING THE MULTI-FUNCTION DOOR CONTROL

1. Press and hold the button on the hand-held remote* that you wish to operate your garage

door.

2. While holding the remote button, pressand hold the LIGHTbutton on the Multi-Function Door

Control. Continue holding both buttons while you pressthe push bar on the Multi-Function

Door Control (all three buttons are held).

3. Release buttons when the motor unit lightsblink. It has learned the code.If lightbulbs are not

installed, two clickswill be heard.

To Erase the Memory

ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES

1. Press and hold the learn button on garage door opener until the learn LED goes out

(approximately 6 seconds). All remote control and keyless entry codes are now erased.

Reprogram any accessory you wish to use.

*3-BUTTON REMOTES

If provided with your garage door opener, the large button is factory programmed to operate it. Additional

buttons on any Security+

3-Button remote or compactremote can be programmed to operate other

Security+

garage door openers.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Chamberlain 248730 User Manual Page 37